Make Sure You Have the Proper Hanging Materials.
Our Whisperwave Clouds and Baffles come with the needed stainless-steel corkscrews for wire suspension (smaller clouds, four per 2’ x 4’, and larger clouds, six per 48” x 96”) but they will arrive separately. Ensure you have these corkscrews on hand or purchase them before installing the product.
- For Horizontal Suspended Whsiperwave Clouds, purchase the Cloud Corkscrew Hangers, X150, 16 per pack, 1.5"
- For Vertical Suspended Baffles, purchase the Baffle Corkscrew Hangers, X290, 16 per pack, 2.9"
Horizontal Suspended Whsiperwave Clouds take a little bit more effort to install. Our anchor placement guide comes in handy:
To find the approximate distance away from the sides to install the corkscrew hangers, multiply the width and length by 0.20, similar to how you would find the diagonal length of a square.
For example, for 4’ x 8’ Whisperwave Clouds, to set the corkscrew hangers, you’ll want to have 3 corkscrews along the horizontal side of the baffle, 1 in the middle approximately 8 inches from the edge and approximately 11.3” from the corners.
For 2’ x 4’ Whisperwave Clouds, set the corkscrew hangers 4.75” away from the sides and 9.5” in the front and back of the cloud. Be sure to keep all hanging wires plumb to ensure the best results for your baffling.
Post a Comment